Care instructionsUpdated a year ago

Is it ok to use vinegar to clean my kitchen and bathroom fixtures?

Using a mixture of 50% water and 50% vinegar can be a safe and effective way to clean your faucets and showerheads. Vinegar is a natural cleaning agent that can help remove mineral buildup and soap scum from these surfaces.

To use a vinegar and water mixture to clean your kitchen and bathroom fixtures, follow these steps:

1. Mix equal parts white vinegar and water in a spray bottle or bowl.
2. Spray or dip a cloth or sponge into the mixture.
3. Use a cloth or sponge to gently scrub the surface of the fixture, focusing on areas with buildup or stains.
4. Rinse the fixture thoroughly with water.
5. Dry the fixture with a soft, clean cloth to prevent water spots.

By following these steps, you can safely and effectively clean your kitchen and bathroom fixtures using a vinegar and water mixture.

What household cleaners could damage my products?

Avoid using the following products that could damage your finish:

• Abrasive and Industrial cleaners, such as those used on toilet bowls, green scrub pads, heavy-duty scrub sponges, and foaming bathroom cleaners.
• Disinfectant spray, soft scrub, tile cleaner, and bathroom cleaners should be avoided.
• Avoid products that claim to be able to remove tarnish and rust as well as those that contain caustic substances like hydrofluoric, hydrochloric, and/or phosphoric acids that can harm your skin.
• Avoid using bleach-based cleaners.

How do I remove fingerprints from my faucet?

• To remove fingerprints from your Sturgianni faucet, you can use a soft cloth or microfiber towel dampened with warm water and mild soap. Gently wipe the surface of the faucet to remove any dirt or grime, and then rinse with clean water. For tougher fingerprints or stains, you can use a solution of equal parts water and white vinegar. Apply the solution to a soft cloth or microfiber towel and gently rub the affected area, then rinse with clean water and dry with a clean towel. Avoid using abrasive cleaners or scrubbers, as they can scratch or damage the finish of your faucet.

How do I prevent scratches on my kitchen and bathroom fixtures?

• To prevent scratches on your high-end faucet and fixtures, avoid using abrasive cleaners or materials. Also, be careful not to bump the faucet with hard objects.

How often should I clean my faucets and fixtures?

• It is recommended to clean your faucet and fixtures weekly or as needed to prevent the buildup of dirt and grime.

Can I use commercial cleaners on my faucets and fixtures?

• Avoid using commercial cleaners on your Sturgianni faucet and fixtures, as they can contain harsh chemicals that can damage the finish of your fixtures.

What is the best way to clean and remove mineral deposits from my shower head?

One of the best ways to clean and remove mineral deposits from your shower head is by using an equal amount of white vinegar and water. Here are the steps:

1. Fill a plastic bag with enough white vinegar and water to submerge the shower head.
2. Wrap the plastic bag around the shower head and secure it with a rubber band.
3. Allow the shower head to soak in the vinegar for several hours or overnight.
4. Remove the plastic bag and turn on the water to flush out any remaining vinegar and mineral deposits.
5. Use a soft-bristled brush to gently scrub away any remaining deposits.

Alternatively, you can also use a commercial mineral deposit remover specifically designed for shower heads.

How do I clean a Push Pop drain stopper in my bathroom sink?

To clean a Push Pop drain stopper in your bathroom sink, you can follow these steps:

1. First, remove the stopper by turning it counterclockwise until it pops up and then pulling it out of the drain.
2. Fill a small bowl or container with warm water and add a few drops of dish soap or another mild cleaner.
3. Place the stopper in the soapy water and let it soak for a few minutes.
4. Use a soft-bristled brush or a clean toothbrush to gently scrub the stopper, paying special attention to any areas with visible buildup or debris.
5. Rinse the stopper thoroughly with warm water to remove any soap residue or debris.
6. Dry the stopper with a clean towel or let it air dry before reinserting it into the drain.

By following these simple steps, you can keep your Push Pop drain stopper clean and free of debris, ensuring that it functions properly and helps keep your bathroom sink drain clear.